Ultimate Washer UW11-PW5553 Heavy-Duty Abrasive 5500 PSizeI Blasting Kit with 0 Degree 1/4 inch 4.0 Sizetainless NPT MEG Nozzle

Turn your pressure washer into a SAND BLASTING machine EASY and QUICK set up that uses water and minimizes dust while sandblasting CARBIDE Nozzle, STAINLESS Steel Spray Nozzle Tip 4.0 and Steel Head for DURABILITY and Excellent Performance 1/4" Male Plug Inlet to Connect to Your Pressure Washer Wand Assembly Working Pressure up to 5500 PSI and 10.0 GPM, max Temp 180 F Ideal to STRIP paint, REMOVE rust, graffiti, stains and any other surface coating with Pressure Washer with dustless sandblasting capabilities. Use it to REMOVE stubborn coating on wood, metal and any other hard surfaces The Sand Blast Kit uses the VENTURI EFFECT to draw sand through a SUCTION hose where it is expelled at high  speed against the cleaning surface with pressurized water. ADVANTAGE of wet sand blasting vs. the dry technique is that the water will draw down a blasted material  as opposed to a dry vapor that spreads  into the air. OPERATION: Attach the sandblasting head to your existing pressure washer wand and insert provided metal probe into your sand source. Secure the head with 1/4 inch male quick connector plug. Position the suction hose above the sandblasting head to keep the hose dry. Uses a DURABLE CARBIDE nozzle for increased STRENGHT and a STAINLESS steel MEG nozzle for longevity and industrial applications for use on most standard pressure washers. THICK WALL suction hose that will not collapse and ADJUSTABLE valve to vary sand intake. Uses dry silica sand or #1 grit sand FACT: Carbide nozzle cones are more SUPERIOR to a steel or ceramic nozzle because they are very LONG-WEARING and extremely corrosion-resistant.  Working pressure up to 1000 PSI - 5500 PSI and 2 GPM - 8 GPM PREMIUM material for durability and excellent performance IMPORTANT - KEEP THE SAND DRY! Sandblasting Kit General Instructions: Run the 25 FT sand suction hose on top of the wand lance in order to KEEP IT DRY. If sand suction hose is under the lance during operation water can run down the sand suction hose getting the sand wet, which will become heavy, and it will slow down the flow of the sand to the sandblasting head. not flow through the head. Eventually the hose will plug and the assembly will need to be cleaned and dried before using. Works with standard power washer with 1/4" Tip 1/4 Inch MEG stainless steel spray nozzle included (4.0 size) Recommended Media: Sand 5500 PSI MAX Pressure 2.0 GPM MIN Flow 10.0 GPM MAX Flow THE POWER YOU NEED. Protect your equipment from premature failure by using our superior product 100% satisfaction guaranteed! If you have any problems, please feel free to contact us. Average Response time is 4-8 hours. At Ultimate Washer we strive for high quality, industrial grade, ultimate advantage and excellent service. Value you can count on. Prices you cannot pass on. Quality you can depend on.